Banner
Main MenuProducts MenuApplications_MenuPrices MenuInformation_Menu Bottom Logo
SpacerProducts
Print Color Brochure
SleevLoc

SleevLockLogo

Machinery Theft-Deterent Device

 The SleevLock is a stainless steel, lightweight and easily portable patented security device designed to immobilize most types of construction equipment machinery, including loader/backhoes, skid steer loaders, crawlers, graders, and articulated loaders. SleevLock locks down an extended hydraulic cylinder disabling movement and making the machine immobile. Made of high-grade stainless steel, SleevLock is highly resistant to sawing, burning, or prying. SleevLock is held secure by a six-pin tumbler lock designed to prevent removal by bolt cutters. The SleevLock devices can be keyed all alike, or differently with a dedicated master key. You can also request restricted keys. (This key can only be made by the original locksmith.)
 
American Lock

American Lock Body
Shackleless lock body Series A2010

  • The American shackleless lock body is a stainless steel six pin
    cylinder housing tumbler lock designed to prevent removal by bolt cutters.
 
Trailer Pintle Lock

Trailer Pintle Lock

  • The Trailer Pintle Lock is designed for a military trailer hitch with
    an American Series A2010 shackleless lock body attached.
  • The Trailer Lock is quick and simple to install and red in color to help
    discourage vandals.
 
Skid Steer Lock

Skid-Steer Lock

  • The Skid-Steer Lock is a stainless steel lightweight pin with an
    American Series A2010 shackleless lock body attached, and designed
    for most Skid Steer Loaders.
 
 

Other Products

 
Wheel 10 Inch

10" Steel RollerWheels
The Small 10" Wheels fit the Caterpillar 247 and 257 as well as the corresponding asv (POSI TRACK) models.

  • Our customers have found that the rubber rear wheels on these models
    only last around 200 hours in some environments, causing the tracks to
    be out of adjustment and start slipping over the sprocket.

  • By installing steel wheels on the rear of the machine, we require less
    track adjustment and have a better flat area for the track to run on.

  • Our customers have machines with over 2000 hours running the steel
    tracks with no failures.

  • Our customers do not have as many bearing failures with the steel
    wheels as they have had with the rubber.

  • Reports indicate that the steel will outlast three sets of tracks.
 
Wheel 14 Inch

14" Steel RollerWheels
The Large 14" Wheels fit the Caterpillar 267, 277 and the 287.
As well as the corresponding ASV (POSI TRACK) models.

  • We have found that by installing the steel wheels on the front and rear of
    machine, (the out side wheels only) Total of eight per machine, we extend
    the life of the track and our customers do not have to adjust the tracks as often.
  • We have found that the rubber on the front and rear wheels wears off
    allowing the track to be out of adjustment and allows the track to be thrown
    off when in a turn.
  • Our customers have machines running with over 2000 hours on the wheels
    with no wear to speak of.

  • Reports indicate that the steel will outlast three sets of tracks.
 
Telephone: (813)248-2904 or 1-800-205-2838 Fax: (813)247-1936
Address: 1700 2nd Avenue East, Tampa, FL 33605
Last Updated July 30, 2014
 
Maintained by PSD Computer Consulting Inc.